HP StorageWorks P9000 Tiered Storage Manager Software 7.1 CLI Reference Guide (TB585-96011, May 2011)

Specifiable values or charactersOperatorsProperty name
Specify a positive integer, or a positive
integer with a unit. (For example, 256,
500KB, or 10MB.)
• An integer from 0 to
9,223,372,036,854,775,807KB
• The units you can specify are KB,
MB, GB, and TB. KB is the default
unit.
#1
=, <>, >, >=, <, <=Capacity
An integer from 0 to 2,147,483,645
=, <>, >, >=, <, <=
DiskCapacityInGB
#2
An integer from 0 to 2,147,483,645
=, <>, >, >=, <, <=DiskRPM
FC
AT
SAS
SSD
-
=, <>DiskType
For GetStorageArray
(subtarget=LogicalUnit) in Device
Manager CLI, specify the value
displayed for the emulation attribute
of the LogicalUnit object.
A maximum of 75 bytes can be
specified.
=, <>EmulationType
For GetStorageArray
(subtarget=LogicalUnit) in Device
Manager CLI, specify the value
displayed for the raidType attribute
of the LogicalUnit object.
Specify this in the format of RAIDx, or
RAIDx(yD+zP).
RAIDx: RAID level
yD: Number of data drives
zP: Number of parity drives
A maximum of 75 bytes can be
specified.
=, <>RAIDLevel
For GetStorageArray in Device
Manager CLI, specify the value
displayed for the name attribute of the
StorageArray object.
A maximum of 384 bytes can be
specified.
=, <>SubsystemName
Filter conditions that can be used in the CLI52