HP StorageWorks P9000 Tiered Storage Manager Software 7.1 CLI Reference Guide (TB585-96011, May 2011)

Specifiable characters or valuesOperatorsProperty name
You can specify the following characters:
A to Z
a to z
0 to 9
Hyphen (-)
Underscore (_)
Period (.)
At sign (@)
Space character ( )
Non-ASCII characters
A maximum of 75 bytes can be specified.
=, <>
PVolMigrationGroup
#1
An integer from 0 to 2
=, <>
PVolMUNumber
#1
For GetStorageArray
(subtarget=LogicalUnit) in Device
Manager CLI, specify the value displayed for the
raidType attribute of the LogicalUnit object.
Specify this in the format of RAIDx, or
RAIDx(yD+zP).
RAIDx: RAID level
yD: Number of data drives
zP: Number of parity drives
A maximum of 75 bytes can be specified.
=, <>RAIDLevel
An integer from 0 to 31
=, <>SLPRNumber
For GetStorageArray in Device Manager CLI,
specify the value displayed for the
displayArrayType attribute (and not the
arrayType attribute) of the StorageArray
object.
Example: XP1024
If you do not know the displayed model name,
specify the product name.
A maximum of 384 bytes can be specified.
=, <>SubsystemDisplayModel
For GetStorageArray in Device Manager CLI,
specify the value displayed for the arrayType
attribute of the StorageArray object.
If you do not know the model name, specify the
product name.
A maximum of 384 bytes can be specified.
=, <>
SubsystemModel
#4
For GetStorageArray in Device Manager CLI,
specify the value displayed for the name attribute
of the StorageArray object.
If you do not know the storage system name,
specify the product name and serial number.
A maximum of 384 bytes can be specified.
=, <>SubsystemName
CLI Reference Guide 49