HP StorageWorks P9000 Tiered Storage Manager Software 7.1 CLI Reference Guide (TB585-96011, May 2011)

Output items (external mapping task)
Table 73 Items output by the GetTasks command (external mapping task) (Task instance)
DescriptionItem
The task ID.
The task ID format is TK########. The time and serial number are converted to
base 36 and displayed in the format ########.
ID
The type of task (ExternalMapping)taskType
The task status
For details on the values displayed, see “Task statuses” on page 207.
status
The date and time when the task was created
creationTime
The execution request date and time for the task
executionRequest-
Time
The date and time when task execution started
startTime
The elapsed time from the starting point of the task execution.
This value is displayed in hhhh:mm:ss format.
If the elapsed time is 10,000 hours or more, 9999:59:59 is displayed. If the
elapsed time cannot be acquired, n/a is displayed. If the task is not executed,
nothing is displayed.
timeElapsed
The date and time when task execution ended
endTime
The user ID of the user who created the task
ownerID
The name of the storage domain
storageDomainName
The serial number of the storage system containing the volume
[subsystemSerial-
Number]
The display model name of the storage system containing the volume
[subsystemDisplay-
Model]
The name of the storage system containing the volume
[subsystemName]
The vendor name of the storage system containing the volume
[subsystemVendor]
The total capacity of the volume to be externally connected in GB. Values of less
than 1 GB are rounded down and displayed as an integer (for example, 4.5 GB
is rounded down to 4 GB).
totalCapacityInGB
The event notification address
notifyToURL
The description of the task
description
Legend:
[ ]: Indicates output only when either the -d or the --detail option is specified.
Details of CLI commands150