HP StorageWorks P9000 Tiered Storage Manager Software 7.1 CLI Reference Guide (TB585-96011, May 2011)

DescriptionItem
The migration status for each volume
For details on the values displayed, see “Task statuses” on page 207.
status
Indicates the migration progress for each volume, as a percentage. Values of less
than 1% are rounded down and displayed as an integer. (For example, 45.3% is
rounded down to 45%.)
migrationProgress
The elapsed time from the start of the task execution for each volume.
This value is displayed in hhhh:mm:ss format.
If the elapsed time is 10,000 hours or more, 9999:59:59 is displayed. If the
elapsed time cannot be acquired, n/a is displayed. If the task is not executed,
nothing is displayed.
timeElapsed
The estimated time for the task execution for each volume. If you specify the
erasedata parameter during task creation, and then execute the task, this value
will include the time to delete data.
This value is displayed in hhhh:mm:ss format.
If the estimated value is 10,000 hours or more, 9999:59:59 is displayed.
timeEstimate
NOTE:
Unknown is displayed for some output items while a volume is still being created when a storage tier
for which the filter condition is a pool is selected as the migration target.
Output items (locking task)
Table 61 Items output by the GetTasks command (locking task) (Task instance)
DescriptionItem
The task ID.
The task ID format is TK########. The time and serial number are converted to
base 36 and displayed in the format ########.
ID
The type of task (Locking)taskType
The task status
For details on the values displayed, see “Task statuses” on page 207.
status
The date and time when the task was created
creationTime
The execution request time and date for the task
executionRequest-
Time
The date and time when task execution started
startTime
CLI Reference Guide 141