HP StorageWorks P9000 Replication Manager Software 7.1 CLI Reference Guide (TB584-96021, May 2011)

drmclusinit (Registers the parameters for the cluster software)
Formats
To register the parameters for the cluster software:
drmclusinit cluster-software-name
To view the parameters registered for the cluster software:
drmclusinit -v cluster-software-name
Description
For a cluster configuration, the drmclusinit command uses an interactive format to register the
parameters necessary to control the cluster software.
The parameters registered using this command are stored in the following location:
Application-Agent-installation-directory\DRM\conf\cluster\cluster-name.dat
The following table describes the cluster software parameters registered by using the drmclusinit
command.
Table 31 Cluster software parameters
DescriptionRegistered item
Enter the name of the virtual server managed by the cluster software.Virtual server name (required)
Enter the service group name.Resource group name (required)
• For a file system:
Enter a hyphen (-).
• For SQL Server:
Enter the SQL instance name.
• For Exchange Server:
Enter the storage group name.
Name of the instance or application
to be backed up (required)
Enter D.
Resource type
Enter the disk resource name. You do not need to enter the service
resource name.
• For an environment with Veritas Volume Manager for Windows:
Enter the cluster resource name for mount-point (logical
volume)
#1
and disk-group
#2
.
Resource name
Enter the following information, based on the resource name:
• When mount-point is specified:
Enter a mount point (such as D:).
• When disk-group is specified:
Enter a disk group name (such as DG01).
Disk name (required when D has been
specified for the resource type)
#1
Basic commands108