HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 CLI Reference Guide (TB581-96066, September 2011)
DescriptionStatusParameter name
Group number of the external parity group
Specify the group number of the external parity group to be
created.
You can specify an integer from 1 to 16384.
If this parameter is omitted, a value is automatically set by Device
Manager.
Optional
externalgrpnum
Port name of the port to which the external storage system is
connected
If you specify multiple (alternate) paths, use a comma to separate
each entry.
When specifying paths, the parameters portname,
externalwwn, and externallun must all be specified as a
set. The order in which they are specified dictates the path priority.
(The first parameter in the set will become the primary path.)
Make sure that the order and number of the values specified for
these parameters are correct.
Required
portname
Port WWN of the external storage system
If you specify multiple (alternate) paths, use a comma to separate
each entry.
When specifying paths, the parameters portname,
externalwwn, and externallun must all be specified as a
set. The order in which they are specified dictates the path priority.
(The first parameter in the set will become the primary path.)
Make sure that the order and number of the values specified for
these parameters are correct.
Required
externalwwn
LUN of the external volume
If you specify multiple (alternate) paths, use a comma to separate
each entry.
When specifying paths, the parameters portname,
externalwwn, and externallun must all be specified as a
set. The order in which they are specified dictates the path priority.
(The first parameter in the set will become the primary path.)
Make sure that the order and number of the values specified for
these parameters are correct.
Required
externallun
Group number of the path
If this parameter is omitted, a value is automatically set by Device
Manager.
Optional
pathgroupid
Emulation type of the logical unit
OPEN-V is the only value that can be specified.
If this parameter is omitted, OPEN-V is set.
Optional
emulation
CLPR number
If this parameter is omitted, 0 is set.
Optional
clprnumber
Command reference42