HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionAttribute
Status of the pool
Valid for P9500 and XP24000/XP20000.
• 0: Normal
• 1: PFUS
• 16: Blocked
• 17: Over threshold
• 18: Regressed
• 19: Warning
• 20: Shrinking
-1 is output if no information can be acquired.
status
Threshold1 of the pool (%)
The value output depends on the poolFunction value.
• When poolFunction is 3: Threshold1 of the Snapshot pool
• When poolFunction is 5: Threshold1 of the THP pool
This information is invalid for other cases (-1 is output).
threshold
Threshold2 of the pool (%)
If poolFunction is 5, the threshold2 of the THP pool is output.
This information is invalid for other cases (-1 is output).
threshold2
Indicates whether the value output to threshold2 is the value determined by the
storage system.
If the storage system is P9500 and poolFunction is 5, either of the following
values is output:
• 0: Value determined by the storage system
• 1: Value set by the user
This information is unknown or invalid for other cases (-1 is output).
threshold2Mode
Capacity of the pool (KB)
When poolFunction is 3 or 5, this value does not match the total capacity of
the pool volumes because the pool of Snapshot or Thin Provisioning uses a control
area.
capacityInKB
Unused capacity of the pool (KB)
For example, for XP24000/XP20000, when poolFunction is 5, the unused
capacity of the pool for Thin Provisioning Software is output.
freeCapacityInKB
Usage rate of the pool
For example, for XP24000/XP20000, when poolFunction is 5, the usage rate
of the pool for Thin Provisioning Software is output.
usageRate
Number of pool volumes
For example, for XP24000/XP20000, when poolFunction is 5, the number of
pool volumes for Thin Provisioning Software is output.
numberOfPoolVols
Device Manager CLI command reference312