HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 Administrator Guide (web) (TB581-96050, May 2011)
• RAID Manager version 01-25-03/01 or later must be installed on the application servers and
virtual command device server.
For details on how to install RAID Manager, see the relevant manual for RAID Manager.
• If there are multiple NICs on the application server, the Device Manager agent and RAID Manager
must use the same IP address.
• The horcm instance for relay must be running on the virtual command device server.
CAUTION:
• When specifying the HORCM_ALLOW_INST parameter for the configuration definition file on the
virtual command device server, the default port must be used for the RAID Manager initiator port
of the application server.
• If the virtual command device server is connected to a command device whose authentication
mode is enabled, you need to authenticate users by executing the raidcom command on the
application server before performing copy pair operations from the GUI or CLI. If the application
server OS is Windows, you need to authenticate users as a Device Manager agent service (HBsA
Service) execution user.
Configuration that uses SVP as a virtual command device
The following figure shows an example of a configuration in which copy pairs are managed by using
SVP as a virtual command device.
Overview50