HP StorageWorks Command View XP Advanced Edition Device Manager Server Installation and Configuration Guide (December 2005)

Command View XP AE Suite Common Component 70
Figure 4-1 Selecting the Number of Trace Log Files (Windows
®
)
4-3-2-2 Specifying the Size of Trace Log Files (Windows
®
)
Windows
®
: The Windows
®
HNTRLib2 utility is stored on the following path: c:\Program Files\
Hitachi\HNTRLib2\bin\hntr2util.exe
To change the size of the trace log files:
1. Ensure you have administrator permissions.
2. Execute hntr2util.exe. The Hitachi Network Objectplaza Trace Utility 2 panel is displayed
(refer to
Figure 4-1).
3. Type the desired size for the trace log files, and then select OK.
4-4 Ports Used By Command View XP AE Suite Common
Component
4-4-1 Ports Used by the Command View XP AE Device Manager Server
and Common Component
Table 4-3 lists the ports used by the Device Manager server and Common Component.
Table 4-3 The Device Manager Server and Common Component Ports
Component Network Port Description
2001/tcp Used by the Device Manager HTTP
(web) server to communicate with
Web Client and the agent. You can
change the port using the
server.http.port property. For details,
see section 7-2-3).
snmp:161/udp May be used for SNMP in the future. If
another application is using this port,
use caution when you upgrade Device
Manager.
snmptrap:162/udp Used for receiving SNMP traps from
the disk array(s).
Device Manager server
2443/tcp Used by the Device Manager server
to use SSL-based communication with
Device Manager CLI, Web Client, and
the Device Manager agent. You can
change this port by modifying the
server.https.port property. For details,
see section 7-2-4.