HP StorageWorks Command View XP Advanced Edition Device Manager Server Installation and Configuration Guide (December 2005)

Windows® Systems Installation 53
CAUTION: Specify the same folder as the folder specified for <database target folder> on the
executing node.
CAUTION: When this command is executed, the port designated for HiRDB to use returns to the default
(23032). If you use another port for HiRDB, you must reset the port after this operation.
IMPORTANT: You must specify an absolute path to the target directory. Do not use a path delimiter (\) at the
end of the target directory name, or you will get a command error. If this occurs, remove the path delimiter
and re-execute the command.
NOTE: This operation restarts Common Component on the standby node.
13. Stop the Common Component services in both the executing and standby nodes: <common
component installation folder>\bin\hcmdssrv /stop
NOTE: Do not stop the Common Component services while another Command View XP AE Suite program
is running.
14. In both the executing node and standby node, change the settings so that HiCommandServer
starts manually.
15. In the Windows
®
Services panel (refer to Figure 3-24), open the properties of
HCommandServer, and then change Startup Type from Automatic to Manual.
16. Register the resource in the cluster software.