HP StorageWorks Command View XP Advanced Edition Device Manager Server Installation and Configuration Guide (December 2005)

Command View XP AE Device Manager Server Properties 120
7-2-22 server.base.home
This property contains the installation directory of Common Component, which is set by the Device
Manager installer. You should not change this property under normal circumstances.
Default: <common component installation directory>
7-2-23 server.horcmconfigfile.hostname
This property allows you to specify whether to use the host name (hostname) or the IP address
(ipaddress) when Device Manager edits the configuration definition file.
CAUTION: Deleting a host name or an IP address that was specified when a copy pair was created disables
operations on the copy pair. In such a case, refresh the disk array information.
Default: ipaddress
7-2-24 server.base.initialsynchro
This property allows you to specify whether to synchronize the management information database
and the displayed information (Command View XP AE Suite Common Repository) when you start
Device Manager. A setting of true will synchronize the information. A setting of false will not
synchronize the information.
CAUTION: If this property is set to true, synchronization of the information will take several minutes. If you
change the property and then log in to Device Manager right away, an error may occur. If that occurs, wait
until the synchronization is finished, and then log in.
Default: false
7-2-25 server.cim.support
This property determines whether CIM support is enabled. If you want to use a VDS service provider
or execute CIM, you must set this property to true.
Default: false
7-2-26 server.cim.http.port
This property specifies HITACHI_ObjectManager.Name as the port for the CIM function if SSL is
disabled.
Default: 5988
7-2-27 server.cim.https.port
This property specifies HITACHI_ObjectManager.Name as the port for the CIM function if SSL is
enabled.
Default: 5989
7-2-28 server.configchange.enabled
This property determines whether to enable the automatic refresh function. This function automatically
performs a refresh when the Device Manager server detects that the system configuration has been
changed by the launched disk array management tool (e.g., Remote Web Console). To enable this
function, set this property to true.
Default: true
7-3 Database Properties
Database properties are contained in the database.properties file.