HP StorageWorks Command View XP Advanced Edition Device Manager Agent Installation and Configuration Guide (December 2005)

Installation Requirements and Procedures 30
Figure 2-14 illustrates an example of the screen displayed during installation of the Device Manager
agent in an HP-UX environment:
–# ./agent_jre_setup.sh
–
–======= 08/25/05 15:39:22 MDT BEGIN swinstall SESSION
– (non-interactive) (jobid=koiwa-0016)
–
–...
–
–======= 08/25/05 15:39:45 MDT END swinstall SESSION (non-interactive)
– (jobid=koiwa-0016)
–
–
–Setup of JRE for Device Manager - Agent has completed successfully.
–
–Installing Device Manager - Agent...
–
–===============================================================================
–License Agreement
–-----------------
–
–Installation and use of Device Manager - Agent requires
–acceptance of the following License Agreement:
–...
–
–If you do not agree with LICENSE shown above, please execute following command to
uninstall Device Manager - Agent.
– /opt/HDVM/bin/.uninstall.sh
–
–
–Installation of Device Manager - Agent has been completed successfully.
–
–
–Please execute hdvmagt_account command and hdvmagt_schedule command to setup Device
Manager - Agent.
–
–Now executing hdvmagt_account command...
–IPAddress : 255.255.255.255
–port : 2001
–userID :
–
–Would you like to change the Device Manager Server information? (Y)es or
(N)o.(default:N)
–...
Figure 2-14 Installing the Device Manager Agent in a HP-UX Environment
2-5-5 Installing the Device Manager Agent on a Linux
®
System
Before installing the Device Manager agent on a Linux
®
system: The installation procedure differs
depending on whether the Device Manager agent is to be newly installed, or an overwrite installation
of Device Manager agent version 1.0 or later is to be performed. Make sure that you install the Device
Manager agent according to the appropriate procedure.
• Please refer to
Table 2-1 for supported OSs and a listing of required programs for your OS.
• You must be a super user.
• At least 64 MB of free space is required on the hard disk.
• Make sure beforehand that there is enough space in the default directory for installing the
Device Manager agent.