HP P9000 Replication Manager Software 7.3.1-00 Application Agent CLI Reference Guide

If you omit this option, the value in the RAID Manager-linkage definition file (DEFAULT.dat) is used.
The values in the RAID Manager-linkage definition file (DEFAULT.dat) are used for any parameters
that are not included in the copy parameter definition file.
You can create a copy parameter definition file by using a name of your choice. Specify the file name
by using an alphanumeric character string that is 64 bytes or less. You must save the copy parameter
definition file in the following folder:
Application-Agent-installation-directory\DRM\conf\raid
-vf VSS-definition-file-name
Specify this option to switch the backup settings used for each VSS backup. You can specify this
option only when using VSS to perform a backup.
Specify the VSS-definition-file-name parameter as a file name only; do not specify the
parameter as a path. You must save the VSS definition file specified in this option in the following
folder:
Application-Agent-installation-directory\DRM\conf\vss
If you omit this option, the command uses the following file as the VSS definition file:
Application-Agent-installation-directory\DRM\conf\vsscom.conf
For details about the VSS definition file, see the HP P9000 Replication Manager Software Application
Agent CLI User Guide.
-script user-script-file-name
Specify this option to execute a user script. Specify user-script-file-name as an absolute path.
The conditions for specifying a value in the user-script-file-name parameter are as follows:
• The value must be 255 bytes or less.
• The value can include alphanumeric, one-byte space, and multi-byte characters.
• The value is case sensitive.
• If the value contains space characters, the entire parameter must be enclosed in double quotation
marks (").
• The following reserved characters cannot be used in the parameter: \ / : * ? | < > "
For details about creating user script files, see the HP P9000 Replication Manager Software Application
Agent CLI User Guide.
If you specify LOCATION=REMOTE in the user script file, you must also specify the -s option.
-s backup-server-name
Specify this option to connect to a remote backup server to perform a backup. Specify the
backup-server-name parameter by using the host name or the IP address of the backup server.
Specify the host name by using a character string that is 255 bytes or less. You can specify the IP
address in IPv4 or IPv6 format.
If you specify a backup server by using the -s option, the backup server names specified in the VSS
definition file (vsscom.conf) and in the VSS definition file specified by using the -vf option are
ignored, and the backup server name specified in the -s option is used.
-auto_import
Specify this option to automatically transfer a backup catalog to a backup server after backing up a
volume. You must specify this option together with the -s option.
-auto_mount mount-point-directory-name
Application Agent CLI Reference Guide 67