HP P9000 Replication Manager Software 7.3.1-00 Application Agent CLI Reference Guide

-svol_check
Specify this option to check the status of a secondary volume on a backup server. You must specify
this option together with the -s option. Checking the status of a secondary volume prevents backup
or restoration failures. The items, volumes, and conditions to be checked are described in the following
table.
Table 12 Status check of a secondary volume
Check condition
Volume to be
checked
Check item
Checked when a primary volume is defined in pairs with
multiple generations of secondary volumes and either of the
following applies:
• A primary volume is a cluster resource.
• A primary volume is a dynamic disk.
All secondary
volumes defined for
a backup-target
primary volume
A secondary volume
is hidden from a
backup server
Always checked.
The secondary
volume to be the next
backup destination
A secondary volume
is not mounted on a
backup server
Note
Each piece of backup information in the backup catalog is managed by using a copy group as a
key. Depending on the backup method, you might not be able to perform restoration, even though
the backup data exists on the secondary volume.
For notes on using Application Agent, see the HP P9000 Replication Manager Software Application
Agent CLI User Guide.
Return Values
0: Normal termination
Any value other than 0: Termination with an error
Conditions Causing an Error
This extended command fails in the following cases:
• An invalid option is specified.
• The system cannot acquire information from the operation definition file linked to the operation
ID.
• A specified Application Agent command option cannot be specified as an extended command
option.
• The system fails to record a backup ID in the backup ID record file.
• A command executed inside the extended command encounters an error.
• The command fails to obtain the name of the directory where dictionary map files are stored.
Example
• In this example, the extended command is used to back up the system databases (master, model,
and msdb) to the secondary volume based on the settings specified in the operation definition file
operation01:
Extended commands52