HP P9000 Replication Manager Software 7.3.1-00 Application Agent CLI Reference Guide

Specify this option to automatically mount a secondary volume on a backup server after backing up
a volume. This option must be specified concurrently with other options by using the combinations in
either 1 or 2 below.
1. The -s and -auto_import options
2. The -cascade and -auto_import options
Specify mount-point-directory-name by using a character string of up to 64 bytes.
If you omit the mount-point-directory-name parameter, a mount destination for a secondary
volume is automatically determined. This destination is determined in the same way as when using
the drmmount command without specifying a mount point.
To unmount the mounted secondary volume, use the drmumount command.
-svol_check
Specify this option to check the status of a secondary volume on a backup server. This option must
be specified concurrently with the -s option. Checking the status of a secondary volume prevents
backup or restoration failures. The items, volumes, and conditions to be checked are described in the
following table.
Table 46 Status check of a secondary volume
Check conditions
Volume to be
checked
Check items
Checked when a primary volume is defined in pairs with
multiple generations of secondary volumes and any of the
following items is applicable:
• A primary volume is a cluster resource.
• A primary volume is a dynamic disk.
• A backup using VSS is performed.
All secondary
volumes defined for
a backup-target
primary volume
A secondary volume
is hidden from a
backup server
Always checked.
The secondary
volume to be the next
backup destination
A secondary volume
is not mounted on a
backup server
This option must not be specified concurrently with the -cascade option.
-cascade
Specify this option to perform a backup on both the local site and remote site concurrently when
configuring a cascade.
After the backup finishes, a backup catalog is registered on the local site and remote site respectively.
The same copy group and MU# of the local site is also used on the remote server.
You cannot specify this option concurrently with the following options:
• -s
• -pf
• -svol_check
If you specify the -rc option concurrently with this option, and the generation identifier specified in
the -rc option and the generation number at the remote side are different, an error occurs.
If you specify the -script option concurrently with this option, a user script file specified in the
-script option needs to exist on both the local site and remote site.
Application Agent CLI Reference Guide 189