HP P9000 Replication Manager Software 7.3.1-00 Application Agent CLI Reference Guide

DescriptionRegistered item
Enter the following information, based on the resource name:
• When mount-point is specified:
Enter a mount point (such as D:).
• When disk-group is specified:
Enter a disk group name (such as DG01).
Disk name (required when D has been
specified for the resource type)
#1
A resource whose resource type is MountV
#2
A resource whose resource type is VMDg
Arguments
-v
Specify this to display the registered parameters.
cluster-software-name
Specify the keyword that identifies the cluster software being used.
If the cluster product you are using is either Veritas Cluster Server for Windows, the keyword is VCS.
The registration of parameter information is not required when the following cluster software is used:
• Microsoft Cluster Service
The specified cluster software name is stored in the following file:
Application-Agent-installation-directory\DRM\conf\cluster\DEFAULT.dat
Notes
• Execute the drmclusinit command before performing backup.
• If you have changed the cluster configuration, execute the drmclusinit command to re-specify
the cluster information.
• Execute the drmclusinit command on both the active server and standby server.
• The resource information to be registered by using the drmclusinit command must completely
match the information registered in the cluster software.
Notes
• The virtual server name to be registered by using the drmclusinit command must satisfy the
following conditions:
• The specified virtual server name is the same as VirtualName in the Lanman resource of
Veritas Cluster Server.
• The specified virtual server name is the same as that set in the DRM_DB_PATH parameter
defined in the Application Agent configuration definition file (init.conf).
• The mount point to be registered as the mount point of the mount point resource (MountV resource)
in the cluster software must have the same format as the format of the mount point registered in
the dictionary map files.
• Only the following resources are registered by the drmclusinit command:
Application Agent CLI Reference Guide 109