HP P9000 Replication Manager Software 7.2 Configuration Guide

Adding Application Agent to the Windows Firewall Exception
list
NOTE:
As of 7.1, automatic Windows Firewall Exception registration is supported. The following procedure
is not required unless the process failed or you elected not to add the exceptions when prompted
during the Application Agent installation.
The Application Agent service services are as follows:
• Copy Controller
• Common Agent
If you chose not to add these services to the Firewall Exception list for Windows during the installation
of Application Agent (or the process failed with an error), you must configure the exceptions manually.
To do this, follow this procedure:
1. Add the Copy Controller service to the list using this command:
Application-Agent-installation-folder\DRM\bin\util\drmaddfwlist.bat
2. Add Common Agent service to the list using this command:
Application-Agent-installation-folder\bin\firewall_setup.bat -set
Application Agent and P9000 RAID Manager
The following sections concern the interaction of Application Agent and P9000 RAID Manager:
• Command line interface for P9000 RAID Manager, page 71
• Protection function of P9000 RAID Manager, page 71
• Using P9000 RAID Manager to configure pair volumes, page 72
• Device Manager and P9000 RAID Manager, page 72
• Starting and stopping P9000 RAID Manager, page 72
Command line interface for P9000 RAID Manager
Note the following precautions regarding using the P9000 RAID Manager command line interface:
• Do not use the P9000 RAID Manager command line interface while carrying out replica operations
from Replication Manager.
• If you use the P9000 RAID Manager command line interface to change a copy pair configuration,
be sure and refresh the system from Device Manager, followed by updating the pair configuration
and refreshing the hosts from Replication Manager.
Protection function of P9000 RAID Manager
Application Agent does not support the protection function of P9000 RAID Manager. This function
should be disabled on servers where Application Agent is installed.
Configuration Guide 71