HP P9000 Replication Manager Software 7.2 Configuration Guide

NOTE:
When using IPv6, both IPv4 and IPv6 must be enabled on the database and backup servers. You can
use IPv6 addresses only if they are global addresses.
Table 25 Database and backup server requirements (file systems)
Required programs
IPv6 sup-
port
Operating system
P9000 RAID Manager
Logical Volume Manager (Windows
LDM
3
or Veritas Volume Manager for
Windows
4
)
Application Agent v 7.0 or later
NWindows Server 2003 SP2
N
Windows Server 2003 SP2 (IPF)
1
NWindows Server 2003 SP2 (64-bit)
YWindows Server 2003 R2 SP2
YWindows Server 2003 R2 SP2 (64-bit)
P9000 RAID Manager
Logical Volume Manager (Windows
LDM
3
)
Application Agent v 7.0 or later
YWindows Server 2008 no SP or SP1
YWindows Server 2008 SP2
Y
Windows Server 2008 IPF no SP or SP1
1
Y
Windows Server 2008 IPF SP2
1
YWindows Server 2008 no SP or SP1 (64-bit)
YWindows Server 2008 SP2 (64-bit)
Y
2
Windows Server 2008 R2 no SP
Y
Windows Server 2008 R2 IPF no SP
1
P9000 RAID Manager
Volume Manager
(Windows LDM
3
)
Application Agent v 7.1
Y
2
Windows Server 2008 R2 IPF SP1
1
Y
Windows Server 2008 R2 IPF SP1
1
Notes:
1. Backups using VSS is not supported.
2. Communication using IPv6 is supported even when using FTP with the CLI. For details, see the
HP P9000 Replication Manager Software Application Agent CLI User Guide.
3. LDM basic disks are supported.
Configuration Guide 57