HP P9000 Replication Manager Software 7.2 Configuration Guide

Common Component and starts HiRDB. After command execution, both P9000 Command View
AE Common Component and HiRDB will not be running.
NOTE:
Do not execute the hcmdsdbclustersetup command more than once at the same time.
Also, do not execute this command and the cvxpaegetlogs command at the same time.
This example shows how to execute the command:
"C:\Program Files\CVXPAE\Base\bin\hcmdsdbclustersetup" /createcluster
/databasepath R:\re_creating_db /exportpath C:\storing_data /auto
5. In the Cluster Administrator window, right-click the service, and choose Properties. In the window
that opens, choose the Advanced tab, select Restart, and click OK. (Perform this step for each of
the services listed below.)
• HBase Storage Mgmt Common Service
• HBase Storage Mgmt Web Service
• P9000 Command View AE Device Manager Web Service
• DeviceManagerServer
• Tiered Storage Manager
• HiRDB/ClusterService _HD0
• Any additional P9000 Command View AE suite resources not listed here
6. In the Cluster Administrator window, right-click the group in which the HDvM service
(DeviceManagerServer) is registered, and choose Move Group to switch the node to the executing
node.
7. In the Cluster Administrator window, right-click the group in which the HDvM service
(DeviceManagerServer) is registered, and choose Online.
Troubleshooting when copy pairs are not recognized
In an environment where Device Manager and P9000 RAID Manager manage copy pairs, if
information about the existing copy pairs cannot be recognized after refreshing the configuration
information, take the following actions to correct the problem:
1. Go to “Items to be checked on the pair management server” on page 119, to make sure that the
configuration definition files for Device Manager Agent and P9000 RAID Manager are correct.
2. Go to “Items to be checked from Device Manager web client” on page 120, to make sure that
information about hosts or pair management servers that are managed by Device Manager server
is correct.
3. Go to “Items to be checked from the web client” on page 121, to make sure that information about
hosts that are managed by the Replication Manager server is correct.
NOTE:
If you are using Device Manager with the Core CLI/SMI-S License, see Appendix E and then use
Device Manager CLI to check the information about hosts (pair management servers) that are managed
by Device Manager server.
Troubleshooting118