HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 CLI Reference Guide (TB581-96335, April 2013)

Specification conditionsParameterCommand name
--
devnum
DeleteVLDEVFromVRPU
Y (condition-1)
model
serialnum
vrpuid
Y (condition-1)
assign
ModifyVirtualVolume
--
capacity
devnums
#5
Y (condition-1)
model
--
poolid
Y (condition-1)
serialnum
--
threshold
tieringpolicy
tierrelocation
Legend:
Y (condition-n): If the specification conditions for the parameter, condition-n, are satisfied, the
command can be executed together with other commands when this parameter is specified.
N: If this parameter is specified, the command cannot be executed together with other commands.
The command is executed by itself. By omitting this parameter, the command can be executed
together with other commands.
--: This parameter does not affect whether the command is executed together with other commands.
#1
If there is a command for which this parameter is specified and a command for which this para-
meter is omitted in the same batch file, specify the command with the parameter first. A value is
automatically set for this parameter when a value is omitted. As such, if the command with the
parameter omitted is executed first, the value that is automatically assigned during the first com-
mand execution might differ from the value specified for the parameter in the second command
execution, thus causing an error.
#2
If the emulation type of the parity group specified for this parameter is something other than
OPEN-V, an error occurs with the batch function and processing stops. Confirm the emulation
type of the specified parity group before executing the batch function.
#3
If the value specified is OPEN-V or if this parameter is omitted, the command can be executed
together with other commands.
#4
If you specify a value that corresponds to P9500 or XP24000/XP20000, the command can be
executed together with other commands.
#5
CLI Reference Guide 415