HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 CLI Reference Guide (TB581-96335, April 2013)

hdcIPAddress=10.208.119.110
ipAddress=10.208.119.113
portNumber=443
protocol=Secure
userID=root
*****: The value is encoded by the CLI.
Server management commands
The Server Management commands provide some management support for the Device Manager
server.
AddURLLink
AddURLLink allows a user to specify URL information (referred to as a URLLink) for a Device Manager
object managed by the Device Manager server.
AddURLLink is used for the following purposes:
• To specify a URLLink for an SMI-S Enabled storage system
The URL information of the software started from Element Manager of the GUI is modified. Note
that a user can set only one URLLink for each SMI-S Enabled storage system.
• To specify a URLLink to P9000 mainframe agent for a mainframe host
For a mainframe host, you can set a URLLink to the P9000 mainframe agent running on the
mainframe host. For details about how to specify the settings for managing mainframe hosts and
information on the AddURLLink command, see Appendix A on page 461.
NOTE:
This command does not support virtualization servers.
Format
When setting a URLLink for an SMI-S Enabled storage system:
hdvmcli [URL] AddURLLink [options]
url=URL name=URLLink-name
linkedid=object-ID-of-the-SMI-S-Enabled-storage-system
targetoption=smi-s
Command reference300