HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 CLI Reference Guide (TB581-96335, April 2013)

volumeType=-1
encrypted=-1
protectionLevel=-1
thpPoolID=-1
*****: The value is encoded by the CLI.
GetStorageArray (subtarget=CommParameters)
GetStorageArray (subtarget=CommParameters) obtains information about how to access
storage systems (including SMI-S Enabled storage systems).
Format
When obtaining information about all storage systems:
hdvmcli [URL] GetStorageArray [options]
subtarget=CommParameters
When obtaining information about a storage system (other than an SMI-S Enabled storage system):
hdvmcli [URL] GetStorageArray [options]
subtarget=CommParameters
serialnum=serial-number model=model
When obtaining information about an SMI-S Enabled storage system:
hdvmcli [URL] GetStorageArray [options]
subtarget=CommParameters
saobjid=object-ID-of-SMI-S-Enabled-storage-system
Parameters
Table 50 GetStorageArray (subtarget=CommParameters) command parameters
DescriptionStatusParameter name
Specify CommParameters.
Required
subtarget
Serial number of the storage system
You cannot specify this parameter if you are obtaining information
about a particular SMI-S Enabled storage system.
Optional
#
serialnum
Model of the storage system
You cannot specify this parameter if you are obtaining information
about a particular SMI-S Enabled storage system.
Optional
#
model
Object ID of the SMI-S Enabled storage system
Specify the object ID obtained from another CLI response. The
value is encoded by the CLI.
Optional
#
saobjid
#
Command reference138