HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 Administrator Guide (TB581-96334, April 2013)

A setting of true will synchronize the information. A setting of false will not synchronize the
information.
Default: false
CAUTION:
If this property is set to true, synchronization of the information will take several minutes. If you
change the property and then log in to Device Manager right away, an error might occur. In such a
case, wait until the synchronization has finished, and then log in.
server.cim.agent
Specify the name of the host on which the Device Manager agent is installed when the function for
acquiring storage system performance information is used.
Performance information can be acquired only when this property is specified.
Default: None
server.cim.support
Specify whether CIM support is enabled.
If you want to execute CIM, you must set this property to true.
Default: true
server.cim.support.job
Specify whether a method for creating or deleting a volume, setting or releasing a LUN path, setting
or canceling security for a LUN, or creating or deleting a LUSE volume is executed asynchronously
or synchronously.
If you set this property to true, the method is executed asynchronously. If you set this property to
false, the method is executed synchronously. If the CIM client does not support the job control
subprofile, specify false.
If you specify any values other than true or false, or if this property does not exist, the method is
executed asynchronously.
Default: true
server.cim.support.protocol
Specify whether to open or close the ports used by the CIM function.
A value of 1 to 3 can be specified. The value specified for this property determines whether to open
or close the non-SSL communication ports (default: 5988/tcp) and SSL communication ports (default:
5989/tcp).
1: The non-SSL communication ports are open, and the SSL communication ports are closed.
2: The non-SSL communication ports are closed and the SSL communication ports are open.
3: Both the non-SSL communication ports and the SSL communication ports are open.
Device Manager server properties354