HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 CLI Reference Guide (TB581-96326, December 2012)

XP12000/
XP10000/
SVS200
XP24000/
XP20000
P9500Description
hostmodeoption
values
--YY
V-Vol expansion
Specify this value when both of the
following conditions are satisfied:
• The host mode is set to Windows
(mode 0C) or Windows Exten-
sion (mode 2C).
• After increasing the THP volume
capacity, you want to force that
capacity to be automatically recog-
nized.
40
--YY
Prioritized device recognition
command
Specify this value when you want to
prioritize commands that force devices
to be recognized.
41
--YY
Prevent "OHUB PCI retry"
Specify this value when you want to
use IBM Z10 Linux.
42
--YY
Queue Full Response
Specify this value if you want to force
QueueFull to be the reply to a host
when the queue is full.
43
--YY
ESAM Svol Read Option
Specify this value when both of the
following conditions are satisfied:
• External Storage Availability Man-
ager is used.
• You do not want a failover to occur
from the MCU to the RCU when an
application is executed, for which
the number of Read commands to
be issued to the secondary volume
is equal to or more than the
threshold value.
48
----Y
BB Credit Set Up Option1
Specify this value when you want to
use BB Credit virtualization to improve
True Copy performance.
49
----Y
BB Credit Set Up Option2
Specify this value when you want to
use BB Credit virtualization to improve
True Copy performance.
50
CLI Reference Guide 57