HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 CLI Reference Guide (TB581-96326, December 2012)

2. Execute the GetStorageArray command to check which command lines in the batch file were
applied to the storage system.
The command processing during batch functionality execution is not performed in the order
described in the batch file. All lines need to be checked to determine which command lines in
the batch file were applied.
3. Delete the command lines applied to the storage system from the batch file.
4. Execute the batch functionality again.
When the target storage system is an XP24000/XP20000 whose microcode
version is 60-02-00-00/00 or later
If an error occurs in the Device Manager server during batch functionality execution, the Device
Manager CLI error message is output as follows:
ERROR RESPONSE:
KAIC90083-E Device Manager Server Exception:
error code= code
error level= level
error source= source
description= description
Check the Device Manager server error code that is output in place of code and the storage system
error code that is output in place of description, and then take one of the following actions:
When the Device Manager server error code is other than 6400:
Perform the following procedure:
1. Execute the GetStorageArray command to check whether there is an error in the batch file.
2. Correct any error in the batch file.
3. Execute the batch functionality again.
When the Device Manager server error code is 6400:
When the error code of the storage system is one of the following values:
"1005,1003", "1005,1004", "1005,1005", "1005,1007", "1005,1018", "1005,1020",
"1005,1021", "1005,1025", "1005,1068", "1005,1134", "1005,1135", "1005,1350",
"1005,1363", "1005,1368", "1005,1600", "1005,1600", "1005,1904", "1005,6012",
"1005,6036", "1005,65660"
"2005,1002", "2005,1009", "2005,1010", "2005,1012", "2005,1013", "2005,1015",
"2005,1021", "2005,1028", "2005,1050", "2005,1126", "2005,1137", "2005,1182",
"2005,1185", "2005,1187", "2005,1196", "2005,1362", "2005,1365", "2005,1600",
"2005,1601", "2005,1904", "2005,1905", "2005,1921", "2005,2015", "2005,6012",
"2005,6036", "2005,65660", "2005,65672"
The configuration information of the Device Manager server and the configuration of the storage
system might not match. Perform the following procedure:
1. Execute the AddStorageArray command or RefreshStorageArrays command.
CLI Reference Guide 395