HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 CLI Reference Guide (TB581-96326, December 2012)

Command execution result
RESPONSE:
An instance of URLLink
objectID=*****
name=test
url=http://10.208.184.97
linkedID=*****
createdByUser=1
*****: The values are encoded by the CLI.
Replication commands
The Replication commands can be used to manage copy pairs.
AddConfigFileForReplication
AddConfigFileForReplication creates the HORCM configuration file for RAID Manager that
is required to create copy pairs for Business Copy Software, Continuous Access Synchronous Software,
Continuous Access Asynchronous Software, Snapshot, and Continuous Access Journal Software.
NOTE:
• This command is not available for XP1024/XP128.
• You cannot perform any operations for Fast Snap.
• Device Manager does not support a configuration in which both P-VOLs and S-VOLs exist in a
single HORCM instance. Make sure all the volumes in a single HORCM instance are either all P-
VOLs or all S-VOLs.
There are three ways to create the HORCM configuration file.
• Method 1: Adds a copy pair definition to an existing copy group that is specified in the RAID
Manager configuration definition file. To use this method, execute the command in the following
format:
hdvmcli [URL] AddConfigFileForReplication [options]
groupname=copy-group-name
pvolhostid=host-ID pvolinstancenum=instance-number
svolhostid=host-ID svolinstancenum=instance-number
pvolarraytype=model pvolserialnum=serial-number
pvoldevnum=device-number
[pvolportid=port-number|pvolportname=port-name]
[pvolpoolid=pool-ID]
svolarraytype=model svolserialnum=serial-number
svoldevnum=device-number
[svolpoolid=pool-ID]
[svolportid=port-number|svolportname=port-name]
replicationfunction={BusinessCopy|ContinuousAccessSync|ContinuousAccessAsync
|Snapshot|ContinuousAccessJournal}
[munum=Mu-number]
Command reference290