HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
The combination of the copy groups is one of the following:
• The serial numbers of the primary site storage systems are the
same; the serial numbers of the secondary site storage systems
are different; and copy pairs with the same consistency group ID
exist.
• The serial numbers of the primary site storage systems are different;
the serial numbers of the secondary site storage systems are the
same; and copy pairs with the same sub consistency group ID
exist.
If the copy type is Continuous Access Journal, these combinations are
not supported.
dd-name
dd name of the CSV file where the error was detected
rec#
Number of the line in the file identified by dd-name where the
error was detected
A specific combination of a storage
system serial number and a C/T
group ID is used for multiple CAJ
Copy Groups: dd-name: rec#
YKJ212E TSO RC=32
The volume specified as the S-VOL is also specified as the S-VOL for
other copy pairs. The same volume cannot be specified as the S-VOL
for multiple copy pairs.
dd-name
dd name of the CSV file where the error was detected
rec#
Number of the line in the file identified by dd-name where the
error was detected
Secondary volume is already spe-
cified in another copy pair as a sec-
ondary device: dd-name: rec#
YKJ213E TSO RC=32
A copy pair capacity check could not be performed because the
capacity of a volume could not be acquired. A capacity check cannot
be performed in either of the following cases:
• When a volume capacity has not been acquired during a Local
Scan, Remote Scan, or NG Scan.
• When a volume is in any of the storage systems below and a
Remote Scan or NG Scan has been performed on the volume. In
this case, the capacity of the volume cannot be acquired.
- XP1024/XP128 series
- XP12000
- XP24000
A copy group definition file was created, but the settings might contain
incorrect information.
A copy pair capacity check could
not be performed because the capa-
city of a volume could not be ac-
quired.
YKJ214W TSO RC=8
The capacities of the copy pair volumes are different. A copy pair
whose P-VOL and S-VOL capacities are different cannot be defined.
To create a copy pair whose P-VOL and S-VOL capacities are different
for migration, specify NOCHECK for the CAPACITY parameter, and
execute the YKIMPORT command. For details, see HP XP7 for Business
Continuity Manager Software Reference Guide.
dd-name
The dd name of the CSV file where the error was detected
rec#
Number of the line in the file indicated by dd-name where the
error was detected
The capacities of the copy pair
volumes are different: dd-name:
rec#
YKJ215E TSO RC=32
Messages 99