HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
The value specified in the DEVN parameter is not in hexadecimal format.
DEVN() not valid hex
YKD008E MSG
SC=48
Access to the REXX variable identified by name failed.
For details about the return code, see IKJCT441 in the TSO/E
Programming Services.
nnnn
Error code returned upon REXX access
REXX failure return code=nnnn
starting with variable name
YKD010E TSO
RC=40
The specified copy group attribute value is invalid for this command.
Correct the value and then re-execute the command.
name
REXX variable name
attribute-value
REXX variable value
Invalid Copy Group attribute name
YKD050E MSG
SC=36 RC=48 (at-
tribute-value)
One or more devices in the 7700E storage system does not support
Continuous Access Asynchronous copy groups.
Check that the command can be executed on this copy group, and
then re-execute the command.
Some pairs in this group do not sup-
port CAA services.
YKD058E MSG
SC=36 RC=48
The YKDELETE command terminated with the return code nnnn and
the reason code rrrr.
This message is always displayed to indicate the return code and the
reason code.
nnnn
Maximum among the severity codes returned during command
execution
YKDELETE command return
code=nnnn, reason code=rrrr
YKD099I TSO
Table 6 List of messages (message ID YKE0x)
Explanation and recommended actionsMessage textMessage ID
Invalid parameters are specified.
For details, see the reason code in the YKE099I message that will
appear after this message. For reason codes, see IKJPARS in the TSO/E
Programming Services.
Supplied parameters invalidYKE000T TSO RC=48
Nothing is assigned to the GOTO parameter.
GOTO() not supplied
YKE001E MSG
SC=48 RC=48
Nothing is assigned to the MSG parameter.
No message MSG() suppliedYKE001E TSO RC=48
Nothing is assigned to the STEM parameter.
No results STEM() supplied
YKE001E MSG
SC=48 RC=48
Nothing is assigned to the TIMEOUT parameter.
TIMEOUT() not supplied
YKE001E MSG
SC=48 RC=48
Messages80