HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
The number of HP storage-system devices scanned by the YKSCAN
command.
count
Number of HP storage-system devices
HP storage systems Devices Found
YKC032I MSG SC=0
(count)
As a result of the device scan, information acquisition on devices for
which no I/O path is available was skipped.
count
The number of devices skipped when the device information was
acquired
The specified devices that do not
have any available I/O paths were
skipped.
YKC033I MSG SC=4
(count)
A dynamic change to an I/O configuration definition was detected
during processing of the YKSCAN command. This error may be due to
the volume serial number in the acquired volume information differing
from that in the actual configuration.
Check the disk configuration definition file after the scan is complete.
If the volume serial number is different from the one in the actual
configuration, re-execute the scan.
A dynamic configuration change was
detected during YKSCAN command
processing.
YKC034E MSG
SC=32 RC=32
The YKSCAN command terminated with the return code nnnn and the
reason code rrrr.
This message is always displayed to indicate the return code and the
reason code.
nnnn
Maximum among the severity codes returned during command
execution
YKSCAN command return
code=nnnn, reason code=rrrr
YKC099I TSO
Table 5 List of messages (message ID YKD0x)
Explanation and recommended actionsMessage textMessage ID
Invalid parameters are specified.
For details, see the reason code in the YKD099I message that will
appear after this message. For reason codes, see IKJPARS in the TSO/E
Programming Services.
Supplied parameters invalidYKD000T TSO RC=48
Nothing is assigned to the MSG parameter.
No message MSG() supplied
YKD001E TSO
RC=48
Nothing is assigned to the STEM parameter.
No results STEM() supplied
YKD001E MSG
SC=48 RC=48
The last character of the STEM parameter is not a period.
stem
Stem name assigned to the STEM parameter
Copy Group STEM(stem) does not
include trailing "."
YKD002E MSG
SC=48 RC=48
The value assigned to the DEVN parameter is invalid.
DEVN() value invalid
YKD002E MSG
SC=48
The last character of the MSG parameter is not a period.
stem
Stem name assigned to the MSG parameter
Messages MSG(stem) does not in-
clude trailing "."
YKD002E TSO
RC=48
Messages 79