HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
An error occurred during execution of the YKP2B command.
See the explanation corresponding to the message ID of the error
message indicated by message-text and take appropriate action.
Also see the additional information indicated by message-value
and message-severity and take appropriate action. If the problem
is not resolved, contact your HP Technical Support or authorized service
provider.
command-name
CLI command name
message-text
Error message
message-value
Additional information about the error message
If no additional information is available, a space is displayed.
message-severity
Additional information about the error message
If no additional information is available, a space is displayed.
The error messages message-text, message-value, and
message-severity are displayed on the TSO/E terminal. Long error
messages may extend over several lines.
Error occurred during execution.
Cmd=command-name
msg=message-text:
message-value:
message-severity
YKB102E TSO
No copy pair information was acquired from the volume to which the
device number device-number was assigned.
There might not be a volume for the specified device number. If the
volume exists for the specified device number, check the channel
settings.
device-number
Device number assigned to the volume from which no copy pair
information was acquired
No information was acquired for
DEVN=device-number
YKB200W TSO
No copy pair information was acquired from the volume to which the
device number Devn was assigned because no I/O paths are
available.
Verify the I/O path settings.
Devn
The device number of the volume on which information acquisition
was skipped
No I/O paths are available for the
specified devices. DEVN=Devn
YKB201W TSO
Messages76