HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
The YKP2B command terminated.
return-code
The return code of the YKP2B command:
0: The command ended successfully. The copy group definition
file was output.
4: Indicates that one of the following occurred.
- The command ended successfully. No copy pair was detected
within the range of the specified device numbers.
- A copy group definition file was created, but volume information
not defined in the disk configuration definition file for the site
specified in the DAD parameter was detected among copy pairs
within the range specified in the DEVN parameter.
- A copy group definition file was created, but a change was de-
tected in the I/O configuration when the YKP2B command was
executed with CHECK specified in the HS parameter.
8: An I/O error occurred in a volume within the search range.
The copy group definition file was created for the volume that was
successfully detected.
44: The processing was canceled due to an error. The copy group
definition file was not created.
48: The command ended due to an invalid parameter.
YKP2B completed. RC=return-
code
YKB001I TSO
No copy pair was detected within the specified range.
Check the operating range and status of the copy pair that you want
to acquire, and execute the YKP2B command again. If the copy pair
status is SIMPLEX, the YKP2B command does not detect any copy
pair.
No copy pair was discovered.YKB002I TSO
The parameter specification was invalid or missing.
Check the following, and then re-execute the command:
• Make sure that the required parameter indicated by parameter-
name was specified.
• Make sure that the value specified for the required parameter in-
dicated by parameter-name is valid.
• Make sure that different device address domain IDs for the primary
and secondary sites are specified for the DAD parameter.
parameter-name
Name of the invalid or missing parameter
Missing or invalid parameter:
parameter-name
YKB100E TSO
The specified prefix is being used by another program.
Check the value specified for the prefix.
The specified PREFIX is being used
by another program.
YKB101E TSO
Messages 75