HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

DescriptionMessage textMessage ID
The command cannot be executed because a GETMAIN
error occurred.
Expand the job execution area, and then re-execute the
command.
nnn (decimal number)
GETMAIN macro return code
mmm (decimal number)
Area size
area (character string)
HIGH means 16 MB or more. LOW means less than
16 MB.
xxx (decimal number)
Command code of the command that was being
executed when the error occurred
80: KTSCAN
81: KTIMPORT
82: KTSTORE
83: KTGETHDA
84: KTLOAD
85: KTACTTPG
86: KTDCTTPG
87: KTQRYTPG
88: KTQSTATS
89: KTQRYRLC
90: KTDCTDEV
91: KTQRYDEV
If a command was not being executed, 0 is dis-
played.
yyy (character string)
Maintenance information
#
If this message is displayed during logging or trace
acquisition, RC=0 is displayed.
A GETMAIN error occurred. (return
code=nnn, size=mmm, area=area, cmd=xxx,
pos=yyy)
KTZ201E MSG TSO CON
PRT SC=44 RC=44
#
A logical error occurred. Contact maintenance
personnel.
nnn (decimal number)
Reason code (maintenance information)
xxx (decimal number)
Command code of the command that was being
executed when the error occurred
See the description of command codes for the
KTZ201E message.
yyy (character string)
Maintenance information
A Logical error occurred. (reason code=nnn,
cmd=xxx, pos=yyy)
KTZ202E MSG TSO CON
SC=52 RC=0
A storage system of an unrecognized model was found.
The unrecognized storage system model was
found.
KTZ203E MSG SC=40
RC=40
Messages 45