HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

DescriptionMessage textMessage ID
The SMS storage group information for
storage-group-name could not be acquired. The
probable causes of the failure are as follows.
• The SMS storage group storage-group-name
has not been defined.
• The KTQRYSMS command is not registered as a
TSO/E authorized command.
Register the KTQRYSMS command with the
IKJTSOxx parmlib member according to the Smart
Manager for Mainframe installation procedure.
• The library that contains the load module of the
KTQRYSMS command is not registered with APF
authorization.
Register the LINKLIB load library HPQKLNKT with
APF authorization according to the Smart Manager
for Mainframe installation procedure.
storage-group-name
Name of the SMS storage group for which inform-
ation could not be acquired
Information about the storage group stor-
age-group-name could not be retrieved.
KTZ100E MSG SC=36
RC=36
No volume belongs to the SMS storage group indicated
by storage-group-name.
storage-group-name
Name of the SMS storage group
No volumes belong to the storage group
storage-group-name.
KTZ101E MSG SC=36
RC=36
An attempt to scan the volume or SMS storage group
indicated by device, which is listed in the CSV file,
failed. Check the status of the volume or SMS storage
group indicated by device.
For details about the error cause, see the return code
for the KTSCAN command indicated in the message
KTZ015I that was output at the same time.
device
The volume or SMS storage group that could not
be scanned.
One of the following is displayed:
- Device number
- Volume serial number
- SMS storage group name
type
- DEVN: Indicates that the value of device is a
device number.
- VOLSER: Indicates that the value of device is a
volume serial number.
- STORGRP: Indicates that the value of device is
an SMS storage group name.
The specified volume(s) device(type) in the
tiering policy information CSV file could not
be scanned.
KTZ102E MSG SC=36
RC=36
Messages 43