HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNYNNN
A CAJ copy pair cannot be dissolved because the
specified S-VOL status is being changed at the
moment.
EA3A
NNNNYNNN
A CAJ copy pair resynchronization, which causes
a copy direction reversal, cannot be made because
the copy pair is in the TRANS status.
EA3B
NNNNYNNN
A suspension that reverses the copy direction
cannot be performed for the CAJ copy pair, be-
cause the specified S-VOL belongs to the M-JNL
group.
EA3C
NNNNYNNN
A CAJ copy pair cannot be made because the
charging limit of the MCU program product has
been exceeded.
EA40
NNNNYNNN
A CAJ copy pair cannot be made because the
charging limit of the RCU program product has
been exceeded.
EA41
NNNNYNNN
A CAJ copy pair between the intermediate site and
the remote site cannot be deleted or suspended
because the journal group of the CAJ copy pair
between the primary site and the intermediate site
in a 3DC Cascade (CAJxCAJ) configuration is in
the Active status.
EA46
NNNNYNNN
The CAJ copy pair cannot be suspended because
it is a delta resync pair.
EA4D
NNNNYNNN
The status cannot be changed from error status to
the delta resync preparatory status, because the
specified P-VOL is not in HOLDER status.
EA89
NNNNYNNN
The status of a CAJ copy pair cannot be changed
because the primary storage system is currently
being turned on or turned off.
EA8A
NNNNYNNN
A copy pair cannot be created because the pool
of the THPz volume specified for the P-VOL of a
CAJ copy pair is being initialized.
EA95
NNNNYNNN
The CAJ copy pair cannot be operated for each
EXCTG because of the following reasons:
• The JNLG specified in the copy group is not
registered in the EXCTG.
• There is a copy pair with a status that is
TRANS.
EAA0
NNNNYNNN
A CAJ copy pair cannot be made because the
charging limit of CAJ in the MCU has been ex-
ceeded. Check the license capacity of this and all
related program products.
EAA2
Messages 283