HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNYNN
A CAA copy pair cannot be created for one of the
following reasons:
• The C/T group ID specified in the RCU is
already used for CAJ(OPEN).
• A total of 128 C/T groups are used in the
RCU for CAJ(OPEN) and CAA(MF/OPEN).
CB12
NNNNNYNN
A copy pair cannot be added to a C/T group
where the P-VOL and the S-VOL are being
swapped.
CB18
NNNNNYYNA dummy volume cannot be created on the S-VOL.
CB1D
NNNNNYYN
The current RCU version does not support Fibre
CA or CAA.
CB1F
NNNNNYYN
Fibre CA or CAA has not been installed on the
RCU.
CB60
NNNNNYNN
Copy pairs with Fibre and ESCON paths cannot
exist within the same C/T group.
CB61
NNNNNYYN
Copy pairs with Fibre and ESCON paths cannot
exist within the same storage system.
CB62
NNNNNYYN
The storage system type of the MCU is not suppor-
ted (not 3990-6/6E, or is 2105).
CB64
NNNNNNYN
A CA copy pair cannot be made because the ne-
cessary difference area does not exist in the RCU.
CB66
NNNNNNYN
A CA copy pair cannot be made because exten-
ded shared memory is not implemented in the RCU.
CB67
NNNNNNYN
A CA copy pair cannot be made because the ne-
cessary difference area does not exist in the MCU.
CB68
NNNNNYNN
The upper limit of 4,096 (or more) copy pairs
cannot be made within the same C/T group by
RCU.
CB69
NNNNNYYN
A copy pair cannot be made because the specified
S-VOL is defined as a command device.
CB78
NNNNNYYN
A CA or CAA copy pair cannot be made because
the CLPR that the specified S-VOL belongs to differs
from the one registered in the C/T group. For de-
tails on the CLPR, see the storage system document-
ation.
CB7E
Messages 275