HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNYYN
The specified SSID, or CU number of the RCU is
incorrect.
C3D3
NNNNNYYN
The specified S-VOL cannot be used because the
device cannot be recognized from the connection
port.
C3D6
NNNNNYYNThe status of the S-VOL in the RCU is incorrect.
C3D7
NNNNNYYN
A CA/CAA copy pair cannot be made because
the volume specified to be the S-VOL is a system
residence volume.
C3D8
NNNNNYYN
A copy pair cannot be created because the THPz
volume specified for the S-VOL satisfies one of the
following conditions:
• The THPz volume is being used by other
program product.
• The capacity is being changed.
• The pages are being released.
• The pool is being initialized.
C3D9
NNNNNYYN
A CA/CAA copy pair cannot be made because
the volume specified to be the P-VOL is a system
residence volume.
C3DA
NNNNNYYNThe S-VOL is not in the suspend status.
C3DB
NNNNNYNN
A copy pair cannot be made because CAA and
CA cannot be specified simultaneously.
C3FE
NNNNNYYN
A CA or CAA copy pair cannot be made or resyn-
chronized because the necessary shared memory
is not implemented in the RCU.
C4FC
YNNNYYYN
Commands that use CA copy pairs, CAJ copy
pairs, or the Remote DKC Control Function cannot
be executed because the number of executable
paths is less than the minimum value.
C825
NNNYNNNN
The command for registering command devices
via the Remote DKC Control Function (YKBLDCMD)
cannot be executed because the specified volume
does not exist.
C8D1
Table 64 Details of error codes CBxx
Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNYNN
A copy pair cannot be made because there was
an attempt to make a copy pair for both directions
with the same C/T group ID.
CB10
Storage system sense byte information274