HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNYYNThe S-VOL is not DFW ON.
C333
NNNNNYYNThe S-VOL is a CAA P-VOL.
C335
NNNNNYYNThe S-VOL has PIN data.
C336
NNNNNYYNThe S-VOL is in the Reserve status.
C337
NNNNNYYN
An intervention request has been issued for the S-
VOL (S-VOL or reserve volume of BC).
C338
NNNNNYYNThe S-VOL is in the FC status.
C339
NNNNNYYN
A copy pair cannot be made because the specified
S-VOL does not support CA.
C33A
NNNNNYYNThe S-VOL is an S-VOL of another copy pair.
C33B
NNNNNYYN
A copy pair cannot be made because the specified
S-VOL is not installed.
C33C
NNNNNYYN
An intervention request has been issued for the S-
VOL (DEV NOT READY status).
C33E
NNNNNYYNThe S-VOL is a CA or CAA pair volume.
C33F
NNNNNYYNThe P-VOL cannot be accessed.
C35C
NNNNNYYN
The condition setting for the number of the Minim-
um Path is incorrect (path problem or invalid path).
C370
NNNNNYYN
Recovery processing for cache memory or shared
memory is being performed. Wait a few minutes,
and then execute again.
C371
NNNNNYYN
Recovery processing for cache memory or shared
memory is being performed. Wait a few minutes,
and then execute again.
C372
NNNNNYYN
A copy pair cannot be made because the specified
S-VOL is a Reserve volume.
C373
NNNNNYYN
A copy pair cannot be made because the specified
P-VOL is a Reserve volume.
C374
NNNNNYYN
The condition setting for the number of the Minim-
um Path is incorrect (multiple CU number setting
or path blocking issue).
C378
NNNNNYYN
The condition setting for the number of the Minim-
um Path is incorrect (path problem or invalid path).
C379
Storage system sense byte information270