HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNYNNN
A CAJ copy pair cannot be made because the
specified volume is a command device.
8F6D
Table 60 Details of error codes C0xx
Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNYNNNNN
The specified serial number or SSID of the primary
storage system is different from the storage system
serial number or SSID of the local CU.
C023
NNYNNNNN
A path cannot be set because the specified CU
number for the secondary site is not supported for
the primary or secondary storage system.
C026
NNYNNNNN
The specified P-VOL does not match the startup
volume.
C02B
NNYNNNNN
The specified serial number or SSID of the primary
storage system is different from the storage system
serial number or SSID of the local CU.
C02C
NNNNNYYN
The copy type for making a CA or CAA copy pair
is incorrect. (You can specify NOCOPY, Full Copy,
or Resync only.)
C032
NNYNNNNN
The command cannot be executed because the
specified serial number or SSID of the primary
storage system does not match the storage system
serial number or SSID of the local CU.
C048
NNYNNNNN
The command cannot be executed because the
specified serial number or SSID of the secondary
storage system does not match the storage system
serial number or SSID of the RCU, or the path is
not registered.
C04C
NNYNNNNN
The command cannot be executed because the
specified serial number or SSID of the secondary
storage system does not match the storage system
serial number or SSID of the RCU.
C04D
NNNNNYYN
The command could not be executed because the
CA or CAA volume is in the SIMPLEX status.
C055
NNNNNYYN
The P-VOL number in the CA or CAA parameter
does not match the bootup volume number.
C058
NNNNNYYN
The serial number or SSID of the primary storage
system in the CA or CAA parameter does not
match the storage system serial number or SSID of
the local CU.
C059
Storage system sense byte information262