HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

DescriptionMessage textMessage ID
The requested processing could not be performed. This
device was skipped and processing continued.
Check the status of the device that caused the error,
correct any error in the configuration or execution
conditions, and then re-execute the command.
device-number-1 (character string)
Device that issued an I/O
device-number-2 (character string)
Operation-target device
If the device number of the operation-target device
was not found, **** is displayed.
message-text (character string)
Message text
code-1 (hexadecimal number)
Subcommand code
code-2 (hexadecimal number)
Error code
For details about an error code, see the description
for that error code.
xxx (decimal number)
Command code of the command that was being
executed when the error occurred
See the description of command codes for the
KTZ201E message.
yyy (character string)
Maintenance information
volume-ID
Information that identifies the volume in which the
error occurred
Volume serial number, control unit number, and
command control address number
DASD device device-number-1(device-
number-2) management error, message-
text. (code-1 code-2, cmd=xxx,
pos=yyy)
KTH251E MSG TSO SC=32
RC=32 (volume-ID)
Messages26