HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNYNNNN
The command could not be executed because the
specified volume is not in the SIMPLEX status.
8D38
NNNYNNNN
A command device cannot be defined because it
differs from the APID that was already registered.
8D39
NNNYNNNN
A command device cannot be defined because
the specified APID is in use by another DEV.
8D3A
NNNYNNNN
A command device cannot be deleted because
the specified volume is not a command device.
8D3D
NNNYNNNN
A command device cannot be made because the
specified CU number is not supported.
8D3E
NNNYNNNN
The command cannot be executed because the
volume specified as the command device is already
part of a copy pair, or is a journal volume.
8D41
NNNYNNNN
The command cannot be executed because the
volume specified as a command device is a volume
used in the open system.
8D42
NNNYNNNN
The command could not be executed because the
logical volume of the specified volume is blocked.
8D43
NNNYNNNN
The command could not be executed because the
specified volume has PIN data.
8D44
NNNYNNNN
The command device cannot be defined. The
reason might be one of the following:
• The corresponding volume is executing a re-
mote control command as a command
device.
• The corresponding volume is part of a CA or
CAA copy pair.
8D45
NNNYNNNN
The command device cannot be deleted. The
reason might be one of the following:
• The corresponding volume is executing a re-
mote control command as a command
device.
• The corresponding volume is part of a CA or
CAA copy pair.
8D46
NNNYNNNN
The command could not be executed because the
specified volume is a BC volume.
8D47
NNNYNNNN
The command could not be executed because the
specified volume does not exist.
8D4D
NNNYNNNN
A command device cannot be defined because it
differs from the APID that was already registered.
8D4E
Storage system sense byte information256