HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNYYY
The command could not be executed because the
BC, CA, or CAA program product is not installed.
8D14
NNNNNNNY
A BC copy pair cannot be made or
resynchronized. Possible reasons include one or
more of the following:
• The status of the copy pair does not allow the
status transition. For details, see error code
2310.
• The charging limit of the program product
was exceeded.
• The copy pair is in the Pending status.
• The copy pair is not in the Split status.
• The specified C/T group ID is not registered.
8D15
NNNNNNNY
A BC copy pair cannot be made or
resynchronized. Possible reasons include one or
more of the following:
• The status of the copy pair does not allow the
status transition. For details, see error code
2310.
• The charging limit of the program product
was exceeded.
• The copy pair is in the Pending status.
• The copy pair is not in the Split status.
• The specified C/T group ID is not registered.
8D16
NNNNNYYY
The command could not be executed because the
BC, CA, or CAA program product is not installed.
8D17
NNNNNYYN
The command could not be executed because the
volume specified by the host command parameter
is the S-VOL.
8D1A
NNNNNYYN
A status cannot be changed because the status of
the specified copy pair does not match the actual
status.
8D1B
Storage system sense byte information252