HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
YNYNNYYN
A CA or CAA copy pair status cannot be changed.
Possible reasons include one or more of the
following:
• The specified S-VOL is online.
• The specified volume is either a CA or CAA
pair volume, or the S-VOL of a BC copy pair.
• All paths to the RCU are blocked.
• The status of the copy pair is not possible for
the requested transition (it is possible that it
is already in requested copy pair status).
• The logical volume of the specified volume is
blocked.
• The path between the primary site and the
secondary site is in the BUSY status.
• The emulation type of the P-VOL and the S-
VOL do not match. Alternatively, the number
of cylinders in the S-VOL is less than the P-
VOL.
• Either the status of the P-VOL is being
changed, or there is a copy pair in the group
with the status being changed.
• The command could not be executed because
the specified CA or CAA volume is in the
SIMPLEX status.
• The S-VOL is not in the SWAPPING status.
• Either the status of the P-VOL is being
changed, or there is a copy pair in the group
with the status being changed.
• A copy pair cannot be made because the
same C/T group ID is set in both the MCU
and RCU.
• The specified C/T group ID is not registered.
• Alternatively, a path cannot be defined and
deleted because either the copy pair status
or the parameter is invalid. (The possible
reasons are documented by error codes
C120 through C12F.)
8C12
NNNNYNNN
A CAJ copy pair cannot be made. Possible reasons
include one or both of the following:
• The micro version on the specified primary
storage system does not support a connection
with the specified secondary storage system.
• The specified primary storage system does
not support a connection with the specified
secondary storage system.
8C1E
YNNNNNNN
The command could not be executed because in
the instruction to transfer to a remote storage sys-
tem, there is an error in the parameter specification
for the host command.
8CE8
Storage system sense byte information250