HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNYNN
The command could not be executed because the
CAA program product is not installed.
6A0F
YNNNNNNN
The command could not be executed because a
remote command was executed while the com-
mand device was not defined.
6A13
YNNNNNNN
The command could not be executed because it
was specified to be remotely executed, but this
command cannot be executed as a remote com-
mand.
6A14
NNNYNNNN
The command could not be executed because an
instruction to delete a command device was issued
against a volume that is not a command device.
6A16
YNNNNNNN
The command cannot be executed because an
unimplemented CU number was specified when
the command device was defined or deleted.
6A18
YNNNNNNN
The command could not be executed because a
remote control command has been received for a
volume that is not a command device.
6A19
YNNYNNNN
The command could not be executed because the
APID specified by the remote command does not
match the APID that was already registered.
6A1E
NYNNNNNN
The setting or status acquisition command for
SMART could not be executed because the spe-
cified parameter is invalid.
6EC0
NYNNNNNN
The setting or status acquisition command could
not be executed because the command for SMART
contains invalid information, or a value out of
range.
6EC1
NYNNNNNN
The setting or status acquisition command for
SMART could not be executed because of either
of the following reasons:
• The volume or pool ID that was specified does
not exist.
• The attribute of the pool that belongs to the
target device is not SMART.
6EC3
Storage system sense byte information248