HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNYYN
A copy pair cannot be created or resynchronized
because the specified P-VOL satisfies one of the
following conditions:
• The P-VOL is being used for FlashCopy.
• The P-VOL is being used for FlashCopy SE.
• The P-VOL is a TSE-VOL.
4B32
NNYNNNNN
A path cannot be set because the CU number for
the specified MCU is not supported.
4B35
NNYNNNNN
A path cannot be set because the port number for
the specified MCU is not supported.
4B36
NNYNNNNN
A path cannot be set because the port number for
the specified RCU is not supported.
4B37
NNYNNNNN
A path cannot be set because the CU number for
the specified RCU is not supported.
4B38
YNYNNNNN
The remote command cannot be executed because
the path between the specified storage system or
CU (SSID) and the command target storage system
is not set, or an error has occurred on the path.
4B49
NNNNNNYN
The CA copy pair that specified a C/T group ID
cannot be created because the specified volume
is a FlashCopy pair.
4B85
NNNNNNYN
A CA copy pair cannot be made because the
specified volume is a FlashCopy pair and differen-
tial-data management unit is cylinder.
4B86
NNNNNYNN
A CAA copy pair cannot be made because the
specified CTID is not registered in the storage sys-
tem.
4BA9
NNNNNYYN
No timestamp transfer mode CA copy pair can be
made because the specified volume is not a CA
copy pair.
4BB1
NNNNNYYN
A timestamp transfer mode CA copy pair cannot
be made because the specified volume is an XRC
pair.
4BB2
NNNNNNYN
A CA copy pair resynchronization that makes it
possible to use the Open/MF Consistency Preser-
vation Function cannot be performed because the
specified C/T group ID is invalid.
4BD1
NNNNNNYN
A CA copy pair cannot be made and resynchron-
ized because the specified volume does not sup-
port the Open/MF Consistency Preservation
Function.
4BD2
Storage system sense byte information244