HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Type of error
Error details
Error
code
OtherSMARTPATHCMDCAJCAACABC
NNNNNNNY
A BC copy pair cannot be made. The reason might
be one of the following:
• The volume size of P-VOL differs from that of
S-VOL.
• The shared memory capacity is insufficient
for copy pair creation.
2331
NNNNNNNY
A BC copy pair status cannot be transitioned be-
cause the maximum multiplicity of the copy pairs
for the P-VOL was exceeded.
2332
NNNNNNNY
A BC copy pair cannot be suspended or dissolved
because the copy pair is in the SIMPLEX status.
2333
NNNNNNNY
A BC copy pair cannot be made because the
emulation type of the specified volume is not sup-
ported.
2334
NNNNNNNY
A BC copy pair cannot be made because the RAID
level or emulation type of the volume is not suppor-
ted.
2335
NNNNNNNY
A BC copy pair status cannot be changed because
the combination of the drive emulation type of the
P-VOL and S-VOL is not appropriate.
2336
NNNNNNNY
A BC copy pair status cannot be changed because
the volume specified to be the P-VOL is already
the S-VOL.
2337
NNNNNNNY
A BC copy pair cannot be resynchronized because
the copy pair is in the SIMPLEX status.
233A
NNNNNNNY
A BC copy pair cannot be resynchronized with
Reverse specified because a CA or CAA copy pair
is not in the suspend status.
233F
NNNNNNNY
A BC copy pair status cannot be changed because
the volume specified to be the S-VOL is already
the S-VOL of a BC copy pair.
2343
NNNNNNNY
A BC copy pair status cannot be changed because
the status of the copy pair does not allow the status
transition. The reason might be one of the
following:
• The volume specified to be the S-VOL is
already the P-VOL of a BC copy pair.
• The volume specified to be the S-VOL is in
the SIMPLEX status.
2344
NNNNNNNY
A BC copy pair status cannot be changed because
the volume specified to be the S-VOL is already
the P-VOL of a CA or CAA copy pair.
2346
Storage system sense byte information226