HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
The timestamp transfer mode cannot be used with this storage system.
Use a device
#2
that supports the timestamp transfer mode. Also, if
scanning was not performed after the storage system microcode was
replaced, perform another scan.
SUPFnc (hexadecimal number)
Value for the version of the storage system support function used
in the copy group
#1
If this message is output while the YKLOAD command is being ex-
ecuted, the RC is 44.
#2
The timestamp transfer mode can be used for the storage system
models listed below. You cannot use the timestamp transfer mode
when using the XP1024/XP128 Series.
• XP12000s with a storage system support function version of X'16'
or later.
• XP24000s with a storage system support function version of X'21'
or later.
Copygroup SUPFnc does not sup-
port the timestamp transfer mode.
YKZ413E MSG
SC=36 RC=36
#1
Messages210