HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
EXCTG information defined in the copy group and EXCTG information
registered in the storage system do not match.
Correct the copy group definition file. This message might be output
when the EXCTG ID specified in the copy group definition is being
used by another copy group.
After removing the cause of the problem, execute the YKMAKE command
again with a SELECT(COND) specification to register the journal group
to EXCTG.
This message is output until the corresponding EXCTG registration
process is executed using the YKMAKE command again.
xxxxxxxx
Items that do not match
CDEV: Arbitration command device number
JNLG: The storage system serial number identified by ssssssssssss
and the journal group number identified by jj is registered to the
EXCTG indicated by e. However, it was not found in the configur-
ation file.
JNLG (string)
The journal type registered to the storage system (the journal type
of the storage system, rather than of the definition)
R-JNL: Journal of the secondary site
M-JNL: Journal of the primary site
jj (hexadecimal number)
The journal group number registered to the storage system (00-FF)
m (decimal number)
The mirror ID registered to the storage system (0-3)
e (decimal number)
The EXCTG ID registered to the storage system (0-3)
ssssssssssss (decimal number)
The serial number registered to the storage system
cccc (hexadecimal number)
The arbitration command device number registered to the storage
system (0000-3FFF)
FFFF is displayed for the supervisor disk controller.
Definition of xxxxxxxx does not
match the actual configuration. (JN-
LG=jj, MIRROR=m, EXCTG=e,
SN=ssssssssssss, CDEV=cccc)
YKZ299E MSG
SC=36 RC=36
Table 44 List of messages (message ID YKZ3x)
Explanation and recommended actionsMessage textMessage ID
The user SVC is not registered, or the &YKSVCNO system symbol of the
IEASYMxx parmlib member is specified incorrectly.
When the user SVC is defined in SVCPARM:
Make sure that the &YKSVCNO system symbol of the IEASYMxx
parmlib member is specified correctly.
When the user SVC is not defined in SVCPARM:
Register the user SVC by KTALCSVC command.
For details about registering a user SVC, see the Smart Manager for
Mainframe User Guide.
SVC # is null or invalid.
YKZ300E MSG TSO
SC=44 RC=44
Messages 197