HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
An error occurred while acquiring the &YKLOGPT system symbol. The
program continues processing while assuming LOGR.
Revise the value specified for the &YKLOGPT system symbol.
rr
The return code of the ASASYMBM macro
An error occurred while acquiring
the system symbol &YKLOGPT.
(rc=rr)
YKZ294E MSG CON
SC=0 RC=0
The version of this configuration file is not supported.
The version of this configuration file
is not supported.
YKZ295E MSG
SC=36 RC=36
The journal group is not registered in EXCTG for the storage system.
The journal group might not be registered in EXCTG because the
YKMAKE command has not been executed for EXCTG, or an error
occurred during the execution of the YKMAKE command. Alternatively,
the journal group might be dissolved from EXCTG registration by
executing the YKRECVER command.
Remove the cause of the problem if the YKZ297E message is output
during the execution of the YKEWAIT or YKQUERY command after
executing the YKMAKE command for EXCTG. Then execute the YKMAKE
command again with a SELECT(COND) specification to register the
journal group in EXCTG for the storage system.
Note that, to register an existing journal group in EXCTG, you need
to execute the YKQUERY command before executing the YKMAKE
command with a SELECT(COND) specified. In this case, the YKZ296E
message will appear until the registration has completed normally.
Also, if you execute the YKQUERY command to obtain the status while
a copy pair in EXCTG is dissolved, the YKZ296E message sometimes
appears when the dissolving of the copy pair is detected at a different
time from the dissolving of EXCTG, but this does not mean that an error
has occurred. In this case, wait until the copy pair status changes to
SIMPLEX, and then re-execute the YKQUERY command. The message
will no longer appear.
In 4x4x4 Delta Resync configurations, when all copy pairs in EXCTG
whose copy direction is from the primary site to the remote site are
dissolved, the journal groups whose copy direction is from the local
site to the remote site are also dissolved from EXCTG registration. For
example, if a Delta Resync is executed and then the YKDELETE
command is executed when EXCTG is in the HOLD status and the copy
direction is from the primary site to the remote site, the journal groups
whose status is DUPLEX and copy direction is from the local site to the
remote site are dissolved from EXCTG registration. As a result, the
YKZ296E message is output if the YKQUERY command is executed to
obtain the status of Continuous Access Journal copy pairs whose copy
direction is from the local site to the remote site. In this case, perform
either of the following operations to register journal groups in EXCTG
for the storage system:
• Execute the YKMAKE HOLD command for Continuous Access
Journal copy pairs whose copy direction is from the primary site
to the remote site.
• Execute the YKMAKE command with a SELECT(COND) specified
for Continuous Access Journal copy pairs whose copy direction
is from the local site to the remote site.
A JNLG is not registered in EXCTG.
(JNLG=jj, MIRROR=m, EXCTG=e,
SN=ssssssssssss)
YKZ296E MSG
SC=44 RC=44
Messages194