HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
The group definition does not match the actual pair configuration. If
GROUPID is displayed for unmatched items or * is displayed on the
device number, storage system serial number, control unit number, or
CCA number, there is a copy pair which is not defined in the copy
group definition parameter, and which belongs to the same consistency
group in the same control unit as the P-VOL or S-VOL.
Check and correct the values of the copy group definition parameters
and re-execute the command.
xxxxxxxx
Items that do not match
COPYTYPE: Copy type
GROUPID: Consistency group ID or Open/MF Consistency attribute
PAIR: Copy pair configuration
PATHID: Path group ID
device#
Device number
If the device cannot be identified, **** is displayed.
SN
Storage system serial number
If the device cannot be identified, ************ is displayed.
CU#
Control unit number
If the device cannot be identified, ** is displayed.
CCA#
Command control address number
If the device cannot be identified, ** is displayed.
Definition of xxxxxxxx does not
match the actual configuration.
DEVN device#(SN,CU#,CCA#)
YKZ271E MSG
SC=12 RC=12
For the port numbers and number of physical paths, update the REXX
variable, which indicates the port numbers and number of physical
paths, to match the settings on the storage system.
Variable(s) were changed for the
number of paths or portID.
YKZ272W MSG
SC=8 RC=8
No paths to be operated exist within the range specified by the
parameter.
Check the parameters specified during command execution, the path
set name specified during the YKLOAD command execution, and the
attributes of the path set (path type, shared attributes, storage system
serial numbers, and control unit numbers).
No path to be operated exist within
the range specified by the supplied
parameter.
YKZ273E MSG
SC=36 RC=36
In the logical path definition for FORWARD index1, the index2 and
index3 port numbers are duplicated.
Delete one of the definitions or make sure that the duplicated port
numbers are correct, and then re-execute the command.
index1
Index number of the duplicated logical path
index2
Index number of one of the duplicated ports
index3
Index number of the other duplicated port
Duplicate ports exist in FORWARD.
YKZ274E MSG
SC=36 RC=36 (in-
dex1, index2, in-
dex3)
Messages 189