HP XP7 Smart Manager for Mainframe Messages (TK916-96002, May 2014)

Explanation and recommended actionsMessage textMessage ID
An I/O error occurred. Business Continuity Manager might not support
this device. Processing will continue with this device skipped.
If a sense byte is set, the sense byte is indicated in the YKZ256E
message.
When CC=3:
The corresponding device might not be configured or connected.
When CC=0 and CSW=xxxxxx0000xxxx (DSB=00, CSB=00):
The corresponding device might not be configured or connected.
When CC=0 and CSW=00000000060000:
MIH might have occurred or a logical path might not be connected.
device-number-1 (string)
The device that issued I/O
device-number-2 (string)
The device to be manipulated
code1 (decimal number)
CC information
code2 (Hexadecimal number)
CSW Information.
code3 (Hexadecimal number)
Subcommand code
code4 (Hexadecimal number)
Completion code
code5 (Hexadecimal number)
Detailed code
xxx (decimal number)
Command code of the command that was executing when the
error occurred
See the command code description in the explanation of the
YKZ201E message.
yyy (string)
Maintenance information
DASD device device-number-
1(device-number-2) I/O error.
(CC=code1
CSW=code2code3code4code5,
cmd=xxx, pos=yyy).
YKZ254E MSG SC=8
RC=8
Messages182